Daily maintenance tips for sand mining

Daily maintenance tips for sand mining

Sand mining, also known as dredging sand, sand mining machinery and equipment tools, sand mining because of the need to soak in the river for a long time, easy to produce rust, in order to extend its service life, the necessary maintenance is necessary.

1, according to the geographical situation of sand mining in advance or back, the action should be flexible, such as large stones, mud and so on must be cleaned up.

2. Check the chain screws, pins and fixed fasteners of the transmission system at any time.

3. When the sand mining vessel is stopped, the diesel engine should be stopped before and then the diesel engine after stopping.

4. In case of strong wind (level 5 or above), the machine should be temporarily shut down to avoid failure. When maintenance or replacement of parts, the machine should be shut down to avoid personal injury accidents.

5, during the use of sand mining should often check the parts of the screw and often add lubricating oil and maintenance, especially the hopper screw and chain pin, water four Angle wheel and 500 reducer on the disc and other parts of the bolt must be fastened well. The four corners of the underwater wheel, etc., should be often filled with butter and lubricating oil.

In the letter to remind you: flood season or shutdown, should be mining sand tied in a firm place, to prevent the ship washed away or cause undue loss.